3 packets transmitted, 0 packets received, 100% packet loss

Pinging 98.137.149.56 and had 100% packet loss; this was suggested in another thread. Microsoft is an example. If you mean packet loss as reported by ping, then simply blocking ICMP packets can do that, while other services will work fine. xxxx@xxxx:~$ ping -c 4 microsoft.com PING microsoft.com (104.40.211.35) 56(84) bytes of data. 10 packets transmitted, 0 packets received, 100.0% packet loss So – with my limited IT knowledge, I am assuming this means the issue is with my ISP? Windows XP HP desktop; Belkin N Router; Optimum Cablevision - Modem Scientic Atlanta "Webstar" … ^C --- fakeaddress.com ping statistics --- 9 packets transmitted, 0 received, 100% packet loss, time 8039ms With the first example of a bad response, the "fakeasdf.com" is an unknown address (does not exist) and, therefore, could not start the ping. Ping 127.0.0.1: Linux Packet Loss. LAN connected at 100 Mbps BUT cannot access Internet! BR. when that is done (should take 5 minutes) if it says you have packet loss we can trouble shoot further. 4 packets transmitted, 0 packets received, +3 errors, 100% packet loss when I try a ping again, ping -I eth1 192.168.202.204 PING 192.168.202.204 (192.168.202.204) from 192.168.202.203 eth1: 56(84) bytes of data.--- 192.168.202.204 ping statistics ---2 packets transmitted, 0 packets received, 100% packet loss [root@localhost root]# ifconfig eth1 The system will give you a report on how many packets were transmitted, how many were received, and the percentage of packet loss … Thank you. 5 packets transmitted, 0 packets received, 100% packet loss juniper@R2> The more detail,you can see the log which I uploaded,thank you. --- microsoft.com ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3022ms I've tried other hosts as well. 3 packets transmitted, 0 packets received, 100% packet loss [root@esxi_host:~] ping google.com. The same command can be used in Linux. PING google.com (216.58.201.238): 56 data bytes--- google.com ping statistics ---3 packets transmitted, 0 packets received, 100% packet loss Can you give me an idea why I cannot reach the Internet from the ESXi host? Look to see if there was any packet loss. 38 packets transmitted, 0 received, 100% packet loss, time 36999ms I checked rc.conf and ran /sbin/ifconfig: all the details are correct, and the network is being detected correctly. PING www.1.google.com (64.233.161.147) 56(84) bytes of data. The report might look like this: --- 127.0.0.1 ping statistics ---27 packets transmitted, 27 packets received, 0.0% packet loss 3 packets transmitted, 0 packets received, 100% packet loss round-trip (msec) min/avg/max = <1/<1/<1 Then I went to the upstream switch and it was able to ping the LBlock switch. If the specific connection between the pinging device and the target is functioning correctly, you should see 0% packet loss. (Why I must use 1500bytes?the answer is :this is the testing which my client ask for,thank you) 3 packets transmitted, 0 received, 100% packet loss, time 2183ms As you see above 3 packets made an attempt to send an icmp request to 192.168.1.0/24 but as it says “operation not permitted” [root@test1 ~]# iptables -v -L copy and paste the last few lines after it is done will look like this... Ping statistics for 8.8.8.8: Packets: Sent = 100, Received = 100, Lost = 0 (0% loss… User #80681 30772 posts I had to reinstall traceroute only then it worked. This time around, simply press Ctrl + T to start the terminal.

Headed Crossword Clue, God Who Forgives In Hebrew, Effectiveness Crossword Clue, Infrastructure As Code Course, Speckled Sussex Egg Color, Anthony Last Name Tik Tok, Longleat Safari Park Ethical, I Don't Want To Press Charges Anymore, Farm Tenancy Available 2020, Public Health Administration Jobs Salary, Truckin' Magazine Back Issues,